1. Home
  2. Products
  3. Waste Recycling Pyrolysis Plant

Waste Recycling Pyrolysis Plant

    1. Shut the feeding sealing door after feeding. Start up the heating system. The mixed gas produced during pyrolysis will enter the multifunction separator. The heavy components will settle down and then enter the residual oil tank through oil pipeline. Then it will be pumped into the pyrolysis furnace for further pyrolysis. While the light components will go up and enter the condensing system.
    1. Waste Rubber Pyrolysis Oil PlantMain pyrolysis furnace (patent number: ZL 2012 1 0206913.X): this pyrolysis furnace can be used for pyrolysis of waste tire, waste plastics, waste rubber, waste PMMA and some other materials. It can prevent combustible gas leakage, thus greatly improve production safety.
    1. Waste Screw Conveyor EquipmentThe waste screw conveyor equipment adopts compression of screw feeder and resistance of the back pressure valve to generate compacted material plug. The material plug will be continuously pushed forward because of the additional raw material, thus realizing continuous feeding.
    1. Oil Gas SeparatorThe oil gas separator can prevent the contact of non-condensable gas in the system with the open air and prevent backfire of burner, thus avoiding the accident effectively. It uses water as the medium to effectively isolate the combustible gas in the process from the combustion process.
    1. Flame ArrestorIt can effectively ensure the safety of gas line and utility points. The pipeline flame arrestor is a safety equipment which is used to prevent flame spreading and explosion caused by backfire of combustible gas and steam of flammable liquid.
    1. Waste Tyre Pyrolysis Oil PlantThe byproduct, carbon black can be utilized effectively. It has reached the EPC standard. The waste tyre pyrolysis oil plant is not only suitable for processing waste rubber, waste plastic, waste tires, and waste acrylic, it can also be used for dealing with oil sludge, and oil field waste.
    1. Shell Tube Heat ExchangerThe shell tube heat exchanger is an energy-saving equipment which can realize heat exchange between two or more fluids with different temperatures. The heat will be transferred from the fluid with higher temperature to the fluid with lower temperature, thus the fluid temperature can reach the specified value of the process, so that it can meet the requirements of the process.
    1. Waste Plastic Pyrolysis Oil PlantMultifunction separation equipment (patent number: ZL 2014 2 0467359.5): the main function of the separation equipment is to remove the solid particles and liquid drops from the gas as much as possible, thus realizing gas-liquid-solid separation. This can ensure normal operation of oil refining pipelines and equipment sets.
    1. Solid Waste Pyrolysis FurnaceThe solid waste pyrolysis furnace is mainly used for pyrolysis of organic solid waste. The design of the key device, pyroysis furnace, adopts manufacturing standard of pressure vessel, thus solving the problem that the vertical furnace will break easily because of the uneven heating of the bottom.
    1. Flue Gas Desulphurization and Dedusting EquipmentThe flue gas desulphurization and dedusting equipment is a patented product which can also be called as multifunction dedusting equipment which can be used for removing of sulfur dioxide, NOX, fluoride and some other harmful gas besides dedusting.
    1. Flue Gas Solid Liquid Separation EquipmentThe main function of the flue gas solid liquid separation equipment is to remove the solid particles and liquid drops from the gas as much as possible, thus realizing gas-liquid-solid separation. This can ensure normal operation of oil refining pipelines and equipment sets. This separation equipment is widely used for product recovery and pollution control.
    1. Mechanical SealThe mechanical seal is a patented product which is mainly used for seal connecting between mechanical equipment and static equipment. The mechanical seal system has sufficient plasticity and relatively high intensity, easy welding, good corrosion resistance, cold machining and hot machining tolerance.
    1. Our waste recycling pyrolysis plant employs high-efficiency mixed fuel heating system composed of coal, fuel and non-condensable gas. After the purification of dust removal tower and industrial waste gas purification device, the waste gas will reach the national emission standard. The whole system has been tested to meet the highest standards in Europe and USA, and has passed EPI certificate.
    1. The raw materials are sent into the pyrolysis system, and sequentially pass the preheating layer, dehydration layer, cracking layer, and carbonization layer, then enter the carbon black discharging device.
Inquiry Form